PipeDream
Model PD50 Electro Hydraulic Pipe Bending Machine.
Standard Tooling: (Consists of one x former and two x roller sets)- 15NB (21.3mm OD) at 50mm Center Line Radius.
- 20NB (26.9mm OD) at 75mm
- 25NB (33.7mm OD) at 100mm
- 32NB (42.4mm OD) at 125mm
- 40NB (48.4mm OD) at 150mm
- 3/4" (19.05mm OD) at 75mm Center Line Radius
- 1" (25.4mm OD) at 100mm
- 11/4" (31.75mm OD) at 125mm
- 11/2" (38.10mm OD) at 150mm
Round Aluminium & other thicker wall tubes
- 16mm at 50mm Center Line radius
- 20mm at 50mm
- 25mm at 65mm
- 32mm at 75mm
- 40mm at 100mm
- 44.4mm at 100mm
- 48.4mm at 125mm
- 50mm at 150mm
- Square & Rectangular Section (RHS).
- 20mm x 20mm at 75mm Center Line Radius
- 25mm x 25mm at 100mm
- 35mm x 35mm at 125mm
- 40mm x 40mm at 150mm
Special Sizes: There are specials that can be achieved on the machine however they need to be looked at on a specific basis, please refer these enquiries to:
Jaydees Machinery Pty Ltd
32 Spencer Street, Jandakot WA 6164Ph: 09 4175355 Fax 09 4175790
)
)
)
